4|e| 3D rhino and Motors explorations¶
I explored the pattern with 3D print. We had several problems with the machine at the lab (the plate broke, the tip was clogged, and then only use the black PLA), before I could really use it
Louise made a print that was stuck onto the heatingbed, to hard to get off, so I though we could place a thin textile onto the heatingbead so we could take it off easily. We tested several textile then found one that worked well. Then I stated to print my files of typography made on rhino. Before printing my full design I tested to print into natural fiber (silk). For that I made 4 layers of 3D print, planned a stop into the file placed the fabric wihile on stop and then restart until it finishes
Small test - WORKED!!:
3D print on organza silk
Larger test some improvments to make:
The result didn't work as the 3dfilament is not hat enought just after the stop and do not print, so the numbers that cpould not be printed on the first round will not be printed after (plus it erases the other lines while printing, effet boule de neige). The results have still some work to make it fully work.
How to improve make a frame that will print just after the stop so the 3D filament has time to reheat. this frames needs to be 4layers(for exemple if the stop is at 4 layers thick) plus one that will print after the stop so it will be 5layers. Then it's easier to remove it from the final result.
Text on Rhino¶
licence Flow alog curve Peacock extention intslled to deal with text