Skip to content

NEW MATERIALS

Extraction Medicinal Properties

  • 65gr Dehydrated Pleurotus funghi
    • 23% Water
    • 45% Alcohol
    • 32% Glycerin
*  Grind and Prep. Grind up whole mushrooms in blender/vitamix. 2500 ml distilled water was applied to accomplish this. 
* Water Decoction. Transfer blended mushroom / distilled water mixture into double boiler. 4 – 6 hours. 
* Add Glycerine. Approx 4-6 hours into decoction,
* Strain off water / glycerine menstruum with cheesecloth.
* ETOH Hot Infusion.  Shake jars vigorously to make sure mark and ETOH is mixed thoroughly. Apply heat for minimum of 2 hours
* Strain off ETOH menstruum. Set aside, ideally place into freezer or refrigerator.
* Combine menstruums of water/glycerine and ETOH menstruum into one large pot.

Pleurotus Post-tincture Shiitake Post-tincture

Tincture

After 12 hours of cooking, we get the tincture. It is a concentrated liquid extract that uses alcohol specifically as one of the solvents to dissolve the components desired properties found in the raw material. Tinctures are made from one mushroom or several. Depending on the properties we want to extract. In this case, this tincture is the result of Pleurotus and Shiitake funghi.

Benefits of extracts:

  • Greater bioavailability
  • Faster absorption rate
  • stable quality
  • easy to mix

Fastest way to get the benefits with full bioavailability.

BIOMATERIALS

Once the tincture of the funghi was obtained, I have made different recipes with different characteristics and proportions.

ALGINATE + PLEUROTUS

Process

   * 25gr Alginate
 * 50ml Glycerin
 * 600ml Pleurotus Ostreatus Tincture
 * Weigh the ingredients in the amounts you want.
 * Put the alginate and glycerin in a blender and add the mushroom stain.
 * Mix until you get a thick and homogeneous paste.
 * Add the rest of the stain and beat again until the lumps are removed. 
 * Leave to dry in the oven until the material takes the right consistency.

Final Result

Polymer Composition Tincture Ingredients
Alginate β-D-mannuronic acids (M) & α-L-guluronic acid (G) Pleurotus Ostreatus Glycerin & Alcohol
Transparency Elasticity Smell Flexibility Resistance Texture
XX XX XXX XX XX XXX

ALGINATE

CMC + PLEUROTUS

Process

   * 1gr CMC
 * 300ml Pleurotus Ostreatus Tincture
 * Weigh the ingredients in the amounts you want.
 * Put the CMC and add the mushroom stain in a blender.
 * Mix until you get a thick and homogeneous paste.
 * Add the rest of the stain and beat again until the lumps are removed. 
 * Leave to dry in the oven until the material takes the right consistency.

Final Result

Polymer Composition Tincture Ingredients
CMC carboxymethylcellulose & carmelous Pleurotus Ostreatus Glycerin & Alcohol
Transparency Elasticity Smell Flexibility Resistance Texture
XX XXX XXX XXXX XX XX

CMC

AGAR + SHIITAKE

Process

   * 5gr Agar
 * 15ml Glicerina
 * 250ml Lentinula Edodes Tincture
 * Heat up the water
 * Stir in Glycerol
 * Pour in agar slowly when the water as heated up
 * simmer on 80c for 20-30min
 * when the consistency has become more dense take it of the stove
 * Pour on sheets while hot
 * Let it dry


Final Result

Polymer Composition Tincture Ingredients
Agar Galactose & Agaropectin & Agarose Lentinula Edodes Glycerin & Alcohol
Transparency Elasticity Smell Flexibility Resistance Texture
XX X X XXX XX XXX

AGAR

BIO FOAM + SHIITAKE

Process

   * 10ml Soap
 * 12ml Glycerin
 * 48gr Gelatine
 * 240ml Lentinula Edodes Tincture
 * Heat up the water
 * Stir in Glycerol
 * Pour in the gelatine slowly while slowli stirring
 * When the powder was dissolved leave to simmer for 10-30min do not let it reach hotter than 85ºC. 
 * Mix in the soap
 * Pour on the sheets
 * Let it dry

Final Result

Polymer Composition Tincture Ingredients
Bio Foam Etileno & Acetato de Vinilo Lentinula Edodes Glycerin & Alcohol
Transparency Elasticity Smell Flexibility Resistance Texture
X X X XX XXX XXX

BIO FOAM

BIOCHROMES

Different techniques are performed for the extraction of pigments. These are two of them;

Hot Water:

  • Chop mushrooms into pieces.

  • Add to pot of simmering water for 1 hour.

  • Allow to cool and strain the liquid.

Cold Alcohol:

  • Chop mushrooms into pieces and add to a jar.

  • Cover mushrooms with vodka until completely submerged, cap tightly

  • Leave overnight (at least)

  • Strain the liquid

COPRINUS COMATUS DYE

   * 25gr Alginate
 * 50ml Glycerin
 * 600ml Pleurotus Ostreatus Tincture
 * Coprinus Comatus Dye (1 Funghy)
 * Weigh the ingredients in the amounts you want.
 * Put the alginate and glycerin in a blender and add the mushroom stain.
 * Mix until you get a thick and homogeneous paste.
 * Add the rest of the stain and beat again until the lumps are removed.
 * Mix the dye of the Corpinus comatus and beat until it is homogeneous. 
 * Leave to dry in the oven until the material takes the right consistency.
Polymer Composition Tincture Ingredients
Alginate β-D-mannuronic acids (M) & α-L-guluronic acid (G) Pleurotus Ostreatus Coprinus Comatus Dye & Glycerin & Alcohol

Coprinus Comatus


Last update: 2023-05-06