Wood working and CNC milling¶

For the CNC here for the previous assignments there is every thing about the process of the CNC and V carve fusion 360 for the CNC.

I discovered the V-carve file on Boss Ismail's computer and I used the previous generated file for cnc milling.

I did one test and I proceeded to mill the final one on a piece of African wood leftover that was in the lab.

Final result¶

After milling, I sanded the piece and applied linseed oil and oil paint to make it darker.

Here some pictures from my studio while finishing the sculpture.

WASTE MATERIAL - FROM CNC IN THE LAB¶

WALLNUT WOOD¶

I found some leftover wood in the lab and I decided to carve the material by hand and give it some organic shape.

I put more than one piece together to create a more 3d sculpture that could be placed on the body in many ways.

I used wood glue to join the pieces and sanding paper to smooth the surfaces.

Work in progress¶

Final result¶

STUDIO AT THE ROOF¶

Named “Shamed,” this carved piece of jewelry embodies the elegance of wood, but is made from animal-friendly materials, ensuring no harm was caused to any creatures during its making.

At the same time it is from waste material from []

AFRICAN WOOD¶

Another piece I found in the trash in the lab is this one that looked very much already like an animal horn so I decided to used it for my collection just smoothing the edges.