3. Circular Open Source Fashion¶
References & Inspiration¶
This week is also inspired by the main concept, which is chaos. I sketched a few drafts and selected the one through which I could best convey the concept using the techniques I should apply this week. After that, I thought about using an appropriate technique and also conducted some experiments to reach the final result.
After that, I chose this design for several reasons, the first being that the techniques used suit the requirement. Additionally, it offers ease of wear and use. I will also include pictures that illustrate the initial experimental process.
fist day¶
On the first day, I selected the design, then created an initial pattern on Illustrator. I cut it on paper using laser-cut machines to ensure the measurements were correct. After that, I made fabric samples for the shape I wanted to use. Finally, I created a sample on the mannequin using the laser-cut machines.
In Illustrator:
- Create the pattern using the Pen Tool and Shape Tool, ensuring to set the correct dimensions.
- For precise measurements, use the Transform Tool.
- Once the pattern is ready, export the file by going to File > Export.
- Choose the suitable format like DXF or PDF for nesting and cutting.
- Make sure to adjust the export settings, ensuring the dimensions are intact and the file is ready for laser cutting or CNC routing.
second day¶
On the second day, I created the final pattern on Illustrator, as well as the clasp and stripes that I would use. After that, I transferred the files to the Rhino application to prepare the file for the laser-cut machine. I cut all the fabrics for the project before the end of the day and also set up my custom settings for the laser-cut machines.
pattren making¶
As I explained in the pattern, I created it in Illustrator and also added openings within the pattern for the stripes to pass through.
Designing the Pattern in Illustrator:
To create the pattern, I start by setting up the document with the required dimensions. I use drawing tools like Pen Tool and Shape Tool to create the basic elements, while utilizing commands for repetition and alignment to ensure accuracy. I carefully define the measurements using the Transform tool. Once finished, I export the file in a suitable format like DXF or PDF to prepare it for the cutting process.
Pattern Measurements:
- Half pattern: 50 cm chest circumference
- Total length: 45 cm
- Neck opening: 9 cm
- From neck to sleeve end: 75 cm
fabrics¶
I used two types of fabric: white denim and blue denim. The reason for this choice is that I specialize in denim, and I also love the high contrast in colors.
I first conducted some experiments on the fabrics simultaneously.
| fabric | power | speed | |
|---|---|---|---|
| white dinem | 90 % | 3 | |
| denim blue | 85 % | 2 | |
| ### desgin the locks |
I used a type of clasp called ‘Joints.’ Initially, I made them manually on denim fabric, and after confirming the shape and measurements, I created them in Illustrator.
I did all the work on Illustrator, where I drew a square with a width of 4 cm and a smaller square of 2 cm, along with a triangle measuring 4 cm. I then combined them together on Illustrator. After that, I created a line inside the triangle to form a shape resembling a lock.
Rhino3D¶
After preparing the file in Illustrator, I transferred it to the Rhino 3D application for cutting preparation. I refined the lines, ensured the measurements were correct, merged the slanted lines, and set the laser-cut settings, using red for the outer lines and choosing the font ‘hairline.
To export the file to Rhino for cutting:
- Save the file in Illustrator: Save the design in DXF or PDF format.
- Open the file in Rhino: Open Rhino and import the DXF or PDF file.
- Prepare the file: Ensure the dimensions and shapes are accurate in Rhino.
- Export for laser cutting: After preparation, export the file again in DXF or PDF format for use with the cutting machine.
The file is now ready for cutting.
laser cut Settings¶
It is always essential to ensure that the cutting settings on the machine are correct and clean. Therefore, I created my own specific settings for cutting denim.
third day¶
process¶
On the third day, the tasks were light as I had completed 70% of the work on the first and second days. The remaining tasks were simply assembling the pieces on the design, using Photoshop to better convey the concept, and working on the documentation
It didn't take me much time to assemble the final shape. I started at 10 o'clock and finished by 1 o'clock.
final Result¶
Here, I give my deepest thanks to the talented Ashraf for his help and for creating a fantastic photoshoot session for me.