OPEN SOURCE HARDWARE¶
BIOLOOM: FROM BIOPLASTIC TO FABRIC¶
- Cut with circular saw 4 wood xx cm and 4 xx cm. (In my case, I used wood scraps that I found in the lab)
- Drill holes in all four xxcm woods at the same height. Join two and two with butterflies.
- Once joined, unfold and glue a horizontal bar with wood glue to generate firmness.
- Cut laser on a finer wood (i used 0.9mm) attached file
- Make like two sandwiches: wood, laser cut file (similar to teeth), wood.
- Place one at the top and one at the bottom also with butterflies, which will make it lock but not limited in length to the fabric
- Thread the loom and skeins with bioplastic tapes
- And ready to knit!:)
Assembling¶
Making bio loom from lucrecia strano on Vimeo.
LASER CUTTER BIOLOOM¶
laser cutter bioloom from lucrecia strano on Vimeo.
BIOPLASTICS¶
I made two bioplastics sheets, xxcm X xxcm to combine it.
Recipe orange:
- 450ml gelatine
- 300ml glicerine
- 900ml water
- 6grms paella spices
Recipe blue:
- 450ml gelatine
- 300ml glicerine
- 900ml water
- blue acrilic
bioloom from lucrecia strano on Vimeo.