Process modules electronic devices#

Shape and modularity process#

Research

Power battery Module#

Research for e-textil modules for power supply#

Power supply
[4V;12V] depends to the micro controler datasheet for a LM386
Market study for the power suply qhape tickness size
I need a >4V power supply. It’s forbiden to add Lipo Battery in serial circuit. I choose to take 2 coin battery with 3.7V together.
How to make a grid to reduce the material cut the shape result
With the general shape Fusion crached !!! Research software to generative design
3D Printed Parameters For the modules
3D part for Ultimaker3 PLA .gcode
battery structure

Cristal Light : LED Module#

Goals#

The module for a LED / Cristal is to change the sense of the light.

LED in circuits are very important to find how it work, how it doesn’t work. I use it to put on the circuit when I turn on the interrupter. Then I know that the device it’s working with my 4V battery or 2X 3.7V cell coin.

The LED has a utility to kwneledge, to communicate with the circuit. The position of the LEF is udge in the device, for us, human…

The cristal to refract the light. The cristal can be a shell, or an anti-shell. It’s a fragile part of the circuit, but also the cristal says to us that we need to take care about our electronical devices. They are material from the earth. All our world turn around the industry and the process of fagricating with the progress…

For the cristal recipe see the assigment Textile as scaffold Week 6

LED LED with cristal Cristal A Cristal B
LED Off LED semi Off Led On
The trace Solder Waiting cristals

Recipe of the cristal solution is in week 6#

500gr water / 200gr / 60 °C during 20 minutes

LED in the solution After 3 days
Circuit and LED The Led The Led

Potentiometer Module#

Potentiometer How it work Details
The potentiometer is a resistor and a “bout de métal” which make the variation of the resistor value.
Different Part of a potentiometer Inside a potentiometer The resistive material The assembly device

Video How work a potentiometer#

Resistive material#

Velostat is use to be a pressure sensor as a piezoresitive material material. A potentiometer is a variable resistor value. The variable value of the resistor can be constantly or with differents step. I have decided to use it in order to make a potentiometer.

Velostat Piezoresistive material Adafruit
Technical details Dimensions: 11” x 11” (280mm x 280mm) 4 mil / 0.1mm thick Weight: 18.66g Temperature Limits : -45°C to 65°C Heat Sealable : Yes Volume Resistivity : <500 ohm-cm Surface Resistivity : < 31,000 ohms/sq.cm
Research Link
Velostat for a pillow for sleeping desorder New Jersey University article
Velostat for a pressure sensor pulsea
Conductive fabric description instructable push_reset
Tilt potentiometer Kobakant

Find a shape for the modularity tools#

Basic shape Shape for potentiometer exported in .dwg Opened in Illustrator to a .pdf

Test for laser cut velostat#

Parameters for the velosta lasercuted in epilog fusion

The quality of this product seduced me to make a module like a swith or a button to change one thing in the circuit if I had an Attyni or a micro controler for the frequency for exemple.

A module with an industrial potentiometer for the prototype#

Traces
carl grim copper connexion Solder a carl grim copper connexion With femal connexions

Connexions#

Research and Result
Metal from header Metal from IC socket own cables production

I try to glue micro controleur with my gold circuit, but it’s not a clean solution.

Vernish Glue Wire
A standard Little / jewellery
I find those material in the lab like little pieces of jewellery

Shape#

Research and Result

The modules can be cut in differents materials

Parameters for Epilog 1 Parameters for Epilog 1 Parameters for Epilog 1 Parameters for Epilog 1

The modules are lasercuted in different material.

Woven fabric leather thermocolant

Video Up-cycling material#

The modules could be placed on differents piece of fabric / garment Lasercuted

A possibily of the set-up#

Electronic landscape